Material for Sale

Mammoth bark ivory and tusk pieces for sale (2022)

Attention to all interested. All the pieces of material offered for sale here are of fossil origin and belong to now extinct animals of Woolly Mammoth. Most of the material came from Siberia, some pieces are from Alaska. The sections of mammoth tusk were found in the ground by occasion and really are by-product of mining operations. Some pieces are white, it means, they were found above the arctic circle where they were frozen for more than 10,000 of years. They are usually found by gold miners. If ivory showing some colors it can be because it shows some mineral penetration. When bark ivory shows some blue, it happens because it had absorbed some Vivianite. If ivory shows some brown-and-black, it comes from the places below the arctic circle like from the Siberian city called Karaganda where it can be found during open pit coal mining. Each kind of material has it’s own unique qualities and can be transformed into beautiful piece of art. Having such material on the market actually creates a good alternative to any kind of modern ivories and makes elephant poaching less profitable and lowers interest to elephant ivory. If there was bigger amount of mammoth ivory on the market, it could drive the price so low that elephant poaching would be not worth the risk and maybe abandoned altogether.

Unfortunately, some states decided to ban all fossil ivories even if it belongs to extinct creature. Because of this I will not be able to sell any of material or carvings to anybody in New York, New Jersey and California. I do encourage you to look at my lamps in Ammonite gallery. Please, don’t forget to check your local ivory laws.
Enjoy my new selection. Thank you

MT-17AMT-17BMT-17CMT-17D

Mammoth’s tusk chunk MT-17
A small piece of mammoth tusk, mostly bark with beautiful pattern and rare blue colors.
All sizes are shown in the inches.
Length: 5.5 inches (114mm) at the longest
Width: 2.75 inches (70mm) at the widest
Thickness: 1/2 inch (12mm) and thicker
Weigh: 6.8oz (.194kg)
Price: SOLD

mt16

Lot of mammoth tusk chunks MT-16
Here is a set of smaller flat bark ivory pieces. Each of the pieces has it’s own unique coloration. They are good to be used for small carvings, jewelry or inlay, maybe small knife handles too.
If you need additional information about size or color of each piece, please contact me. All sizes are shown in the inches.
Weight: 1lb (.457kg)
Price: $100.00 including shipping. International shipping pays extra.

Mammoth ivory bark piece MT-14
Here is a chunk of mammoth ivory. It is mostly bark with beautiful patterns and colors. One side is very thick mostly with white material. This piece can be used for knife handle making or jewelry making, carving and scrimshaw.
Length: 11 inches (279mm) at the longest
Width: 3.75 inches (95mm) at the widest
Thickness: 1.5 inch (38mm) at the thickest
Weigh: 1lb 4.1oz (.568kg)
Price: SOLD


Mammoth bark ivory and tusk pieces for sale (2018)

mt13amt13bmt13cmt13d

Mammoth tusk section MT-13
Here is a chunk of mammoth ivory. It is a part of hollow section. One side is very thick and looks quite solid. This piece can be used for knife handle making or carving, jewelry too.
Length: 4.00 inches (100mm) at the longest
Width: 4.50 inches (114mm) at the widest
Thickness: 1.7″ (43mm) at the thickest
Weigh: 1lb(.457kg)
Price: $120.00 including shipping. International shipping pays extra.

mt-12amt-12bmt-12cmt-12d

Mammoth tusk section MT-12
Here is a chunk of mammoth ivory. It is part of hollow section with beautiful crackling patterns and light colors. This piece of mammoth ivory bark is very pretty and holds the shape of the tusk. It can be used for carving or knife handle making. This piece of ivory is good for relieve carving. Looks like it will be great fro scrimshaw.
Length: 8 inches (204mm) at the longest
Width: 2.75 inches (70mm) at the widest
Weigh: 1lb 6.3oz(.636kg)
Price: $175.00 including shipping. International shipping pays extra.

MT-11A

Mammoth tusk chunk MT-11
Here is a mammoth bark ivory piece that is mostly brown outside and white inside. This piece is good to be used for small carvings, jewelry, scrimshaw or inlay, maybe knife handles too.
(Dimensions on the picture are shown in inches.)
Length: 9.75 inches (225mm) at the longest
Width: 2.75 inches (70mm) at the widest
Thickness: about 3/4 inch (20 mm) at the thickest
Weigh: 9.3oz (.265kg)
SOLD

mt10amt10bmt10cmt10dmt10emt10f

A huge Mammoth tusk section MT-10
Here is aa big chunk of mammoth tusk for sale with some variations of brown and white colors. The piece can be used for knife handle making, jewelry, any kinds of carving and scrimshaw. It has plenty of useful material.
Length: 12 inches (307mm) at the longest
Width: 5 inches (127mm) at the widest
Thickness: 3 inch (75mm) at the thickest
Weigh: about 7lb (over 3 kilos)
Price: $1100.00 including shipping.

MT-9A

Mammoth tusk section MT-9
Here is a small tip of mammoth tusk for sale with brown and white color. The piece can be used for display or carving.
Length: 4.5 inches (113mm) at the longest
Width: 1.75 inches (45mm) at the widest
Weigh: 6.4oz (.182kg)
Price: Sold

mt8amt8b

Mammoth tusk/ bark sections MT-8
Here are few mammoth bark ivory pieces that is mostly cream-colored outside and inside. It came from the same tusk section as MT-6 or MT-8. The entire section was found in deep permafrost and because of that it lucks darker colors. This pieces are good to be used for small carvings, jewelry, scrimshaw or inlay, maybe knife handles too?
(Dimensions on the picture are shown in inches.)
Length: Length: 8.75 inches (222mm) at the longest
Width: 1.75 inches (44mm) at the widest
Thickness: about 1/4 inch to 1/2 inch (6 to 12 mm) at the thickest
Weigh: 12.8oz (.368kg)
Price: $100.00 including shipping. International shipping pays extra.


Mammoth bark ivory and tusk pieces for sale (2022)

mt7amt7b

Mammoth tusk/ bark sections MT-7
Here are 3 mammoth bark ivory pieces that is mostly cream-colored outside and inside. It came from the same tusk section as MT-6. The entire section was found in deep permafrost and because of that it lucks darker colors. This pieces are good to be used for small carvings, jewelry, scrimshaw or inlay, maybe knife handles too.
(Dimensions on the picture are shown in inches.)
Length: Length: 10.5 inches (265mm) at the longest
Width: 2 inches (50mm) at the widest
Thickness: about 1/4 inch to 1/2 inch (6 to 12 mm) at the thickest
Weigh: 1lb 7oz(.644kg)
Price: $140.00 including shipping. International shipping pays extra.

mt2amt2bmt2cmt2d

Mammoth tusk section MT-2
A very impressive chunk of mammoth ivory with plenty of solid material. It came from the same section as MT-1. This piece is very good for many purposes like carving, jewelry making or….
Length: 9 inches (230mm)
Width: 3.5inches (85mm) at the widest
Thickness: almost 1.5 inch (40mm) at the thickest
Width: 2lb 1.1oz (.927kg)
Price: $300.00 including shipping. International shipping pays extra.

mt1amt1bmt1cmt1d

Mammoth tusk sections MT-1
A very impressive chunk of mammoth ivory with plenty of solid cream-colored material. This piece is very good for many purposes like carving, jewelry making or….
Length: 10.5 inches (265mm)
Width: 3.5inches (85mm) at the widest
Thickness: almost 1.5 inch (40mm) at the thickest
Weigh: 1lb 12.8oz(.806kg)
Price: $300.00 including shipping. International shipping pays extra.


Ivory scales for knife handles.

Knife scales KS-14
A nice pair of mammoth ivory bark scales with light cream colors and beautiful grain. A totally flawless material for knife handles. It has one natural crack on one of them but it add more “character”.
Length: 4-5/16″ (110 mm)
Width : 1-3/8″ (35 mm)
Thickness: 3/16″ or thicker for most of it (4.7 mm)
Price :$105.00


Ivory scales for knife handles.

Knife scales KS-7
A nice pair of mammoth ivory bark scales with rich variety of brown and dark colors. A perfect material for knife handles for smaller knife. Possibly folding knife
Length: 3-1/2″ (86 mm)
Width : 7/8″ (21 mm)
Thickness: between 1/4″ (6.3 mm) and thicker
Price :$80.00


Ivory scales for knife handles.

Knife scales KS-5
A nice pair of mammoth ivory bark scales with rich variety of brown and dark colors. . A perfect material for knife handles for any kind of knife. Back side may need some build-up.
Length: 4-5/16″ (109 mm)
Width : 1-3/8″ (35 mm)
Thickness: up to 1/4″ (6.3 mm) on the thickest
Price :$110.00

Knife scales KS-3
A nice pair of mammoth ivory bark scales with really wonderful colors. The grips are very elegant with many characteristics that make mammoth ivory so unique. they have some natural crackling. It is a great material for knife handles for any kind of knife.
Length: 3-7/8″ (99 mm)
Width : 1-1/8″ (29 mm)
Thickness: 1/4″ to 3/8″ (6.5 9.5 mm)
Price $120.00 including shipping. International shipping pays a little bit extra.